Has anyone used this parts supplier before?
Re: Has anyone used this parts supplier before?
is your pull on the side with the old hose? I use Bendix Ceramlub on the caliper hardware, it's by far the best caliper lube. There are lots on the market though. What about bleeding? one small bubble can cause lack of pressure in a caliper
- TulsaSpider
- Posts: 1547
- Joined: Tue Apr 29, 2008 7:33 pm
- Your car is a: 1978 Spyder 124 2L
- Location: Tulsa, Ok
Re: Has anyone used this parts supplier before?
Ok I am a wee bit pissed. I ordered the part on the 28th of Dec. After 16 days and multiple phone calls. I get a message my part has been shipped. I thought jeez that was a pain, but if I get the part it will be worth it. Well today I get an E-mail saying that they can't get the caliper and a refund has been issued (but it hasn't showed up yet)... It took them 17 days to figure out that they don't have the caliper? Granted there were some holidays in there but that's ridiculous! I strongly recommend staying away from this place You never know till you try! I guess I'll keep an eye out on Ebay maybe...
Clark
Clark
1978 Spyder 1800 make that 2L! Finally making real progress!
Re: Has anyone used this parts supplier before?
Try Vicks? They are practically next door. Or try the following
rockauto.com
or
autozone.com
or
partsamerica.com
rockauto.com
or
autozone.com
or
partsamerica.com
- TulsaSpider
- Posts: 1547
- Joined: Tue Apr 29, 2008 7:33 pm
- Your car is a: 1978 Spyder 124 2L
- Location: Tulsa, Ok
Re: Has anyone used this parts supplier before?
Thanks for the suggestions!
I can't swing $150 at Vick's I haven't used Rock's before they are $100
autozone and partsamerica are unable to help
I can't swing $150 at Vick's I haven't used Rock's before they are $100
autozone and partsamerica are unable to help
1978 Spyder 1800 make that 2L! Finally making real progress!
-
- Patron 2022
- Posts: 4211
- Joined: Thu Jan 10, 2008 8:32 pm
- Your car is a: 1982 2000 Spider
- Location: Granite Falls, Wa
Re: Has anyone used this parts supplier before?
Clark, I got mine from Bruce (http://www.fiatparts.com/fparts.htm). He had the best price at the time and he's always shipped immediately for me.
I am repeating personregardless, but Bruce bears repeating.
Ron
I am repeating personregardless, but Bruce bears repeating.
Ron
Last edited by rlux4 on Wed Jan 14, 2009 10:40 pm, edited 1 time in total.
Re: Has anyone used this parts supplier before?
I have a used one you can have. Its been in the garage for a couple of years. Pay for shipping and its yours.
or you can
Try Parts America.com Each caliper is 55.00.
Parts 46503 & 46502
http://www.partsamerica.com/ProductDeta ... 03&PTSet=A
or you can
Try Parts America.com Each caliper is 55.00.
Parts 46503 & 46502
http://www.partsamerica.com/ProductDeta ... 03&PTSet=A
- TulsaSpider
- Posts: 1547
- Joined: Tue Apr 29, 2008 7:33 pm
- Your car is a: 1978 Spyder 124 2L
- Location: Tulsa, Ok
Re: Has anyone used this parts supplier before?
On partsamerica.com when you go to check out it's "sorry we can't get these", to paraphrase! What a tease!
You know it's kinda funny when I first started doing research on my Spider I went to "local" parts websites and looked at things like brake calipers etc... I thought "cool there are parts readily available". I guess just because they list a bunch of options doesn't mean they actually exist O'Reilly's lists a LH rear for a good price, but no RH. Heh just my luck! I put in a call before to them but never got a call back. I think I'll try again tomorrow. Otherwise Lanciaf I will hit you up for the used one and attempt to re-build it myself!
Thanks for the suggestion Ron, He's got one of the better prices that are "real" all those $55 girls seem to be just a tease!
You know it's kinda funny when I first started doing research on my Spider I went to "local" parts websites and looked at things like brake calipers etc... I thought "cool there are parts readily available". I guess just because they list a bunch of options doesn't mean they actually exist O'Reilly's lists a LH rear for a good price, but no RH. Heh just my luck! I put in a call before to them but never got a call back. I think I'll try again tomorrow. Otherwise Lanciaf I will hit you up for the used one and attempt to re-build it myself!
Thanks for the suggestion Ron, He's got one of the better prices that are "real" all those $55 girls seem to be just a tease!
1978 Spyder 1800 make that 2L! Finally making real progress!
- manoa matt
- Posts: 3442
- Joined: Thu Oct 26, 2006 4:28 pm
- Your car is a: 1978 Fiat 124 Spider 1800
- Location: Honolulu, Hawaii
Re: Has anyone used this parts supplier before?
Tulsa,
I bought a 76 parts car a few months ago. The previous owner "said" he replaced the rear calipers with new units prior to storing the car, however he never got a chance to bleed them. They appear new, but I have not taken them off yet. I may get around to it this weekend. Send me an email if you are interested: matt.scarton@gmail.com
I bought a 76 parts car a few months ago. The previous owner "said" he replaced the rear calipers with new units prior to storing the car, however he never got a chance to bleed them. They appear new, but I have not taken them off yet. I may get around to it this weekend. Send me an email if you are interested: matt.scarton@gmail.com
Re: Has anyone used this parts supplier before?
I forgot about this one.
Try
Scott Weston at AW imports 800-631-5589.
They import direct Fiat parts and are generally cheaper than the vendors.
Try
Scott Weston at AW imports 800-631-5589.
They import direct Fiat parts and are generally cheaper than the vendors.
- TulsaSpider
- Posts: 1547
- Joined: Tue Apr 29, 2008 7:33 pm
- Your car is a: 1978 Spyder 124 2L
- Location: Tulsa, Ok
Re: Has anyone used this parts supplier before?
E-mail sent!
I will give Scott a call!
I will give Scott a call!
1978 Spyder 1800 make that 2L! Finally making real progress!
- TulsaSpider
- Posts: 1547
- Joined: Tue Apr 29, 2008 7:33 pm
- Your car is a: 1978 Spyder 124 2L
- Location: Tulsa, Ok
Re: Has anyone used this parts supplier before?
Well I called O'Reilly's back today and they said they had one in Houston ($36) so I'll let you all know if it really comes in on Tuesday!
1978 Spyder 1800 make that 2L! Finally making real progress!
- TulsaSpider
- Posts: 1547
- Joined: Tue Apr 29, 2008 7:33 pm
- Your car is a: 1978 Spyder 124 2L
- Location: Tulsa, Ok
Re: Has anyone used this parts supplier before?
Well the caliper came in today 35.99 (15$ core) brake hardware included! I did it! Go me!
1978 Spyder 1800 make that 2L! Finally making real progress!