Idler Arm

wikkid · Post by **wikkid** » Sat Jul 23, 2011 3:42 pm

A dollop of stop-leak in with the ATF will help the health of your seals.

tartan18 · Post by **tartan18** » Fri Jul 29, 2011 2:20 am

So what is the overall wisdom of you Fiat Wizards ??? AFT in the idler or 90EP oil ... or a mixture. I took off my idler and it was nearly dry ... a lot of metallic "crud." I am going to reassemble with "oil" and if that doesn't work I will buy a new/replacement from one of our vendors.

So ... oil or ATF for now ??

Thanks for your help.

azygoustoyou · Post by **azygoustoyou** » Fri Jul 29, 2011 9:02 am

Mix a little oil in the ATF.

wikkid · Post by **wikkid** » Fri Jul 29, 2011 10:09 am

ATF is basically synthetic oil (hydraulic fluid, also similar to fork or shock oil).

minimike · Post by **minimike** » Sun Aug 14, 2011 9:25 pm

Can the front of the car be jacked up to effect a proper fill without removing the damper from the firewall?

azygoustoyou · Post by **azygoustoyou** » Sun Aug 14, 2011 9:57 pm

Maybe if you take the bolts out, you may be able to angle it without jacking the car up. It may take two people to do it. One to hold and the other to fill.

Idler Arm

Re: Idler Arm

Re: Idler Arm

Re: Idler Arm

Re: Idler Arm

Re: Idler Arm

Re: Idler Arm