installed new rear calipers,installed new front calipers bled rear everything fine good pressure,trying to bleed front no pressure to calipers,disconnected line at master no fluid come out, PLEASE HELP NEED TO TAKE THIS CAR ON ROAD IT IS TIME AFTER THIS BAD WINTER.
THANK YOU
master cylinder front brake no fluid
-
divace73
- Posts: 1380
- Joined: Sun Oct 17, 2010 5:59 am
- Your car is a: 1980 Fiat 124 Spider Silver
- Location: Sydney, Australia
Re: master cylinder front brake no fluid
you may need a new master cylinder as well???
Check the hose from the reservoir to the MC is not blocked....
Check the hose from the reservoir to the MC is not blocked....
Cheers David
-=1980 silver Fiat 124 Spider=-
If you want to see pics of my car (and other random stuff) >>click here<< OR
see my >>You tube channel<<
-=1980 silver Fiat 124 Spider=-
If you want to see pics of my car (and other random stuff) >>click here<< OR
see my >>You tube channel<<
-
veloce
Re: master cylinder front brake no fluid
five months ago ichanged power booster could be that i did not set the rod lent where was suppose to be?
-
DieselSpider
- Posts: 2130
- Joined: Wed Dec 24, 2014 10:21 pm
- Your car is a: 1978 124 Spider with Isuzu Turbo Diesel
Re: master cylinder front brake no fluid
Try gravity bleeding them. If the flex hoses to the front calipers have not collapsed they should gravity bleed easily. My 78 Spider is the only car I have owned that actually gravity bleeds quite well with no need to leave the bleeders open for hours to get the flow going. Else you may need to vacuum bleed them to prime the master cylinder.veloce wrote:five months ago ichanged power booster could be that i did not set the rod lent where was suppose to be?