Last night I put on the control arms on my front suspension after replacing the bushings and went to grease them and they seemed perfect last night. I looked at them today and they still travel fine, but theres a white residue on some of the rubber parts. I used lithium grease also. Should I be concerned?
Here is the grease I used
Did I use the wrong grease?
- Odoyle
- Posts: 440
- Joined: Mon Dec 01, 2014 10:06 pm
- Your car is a: 1983 Pinafarina Spider
- Location: CA
-
- Posts: 3996
- Joined: Sat May 23, 2009 1:23 pm
- Your car is a: 1971 124 Spider
- Location: Texas, USA
Re: Did I use the wrong grease?
Why grease them? They are not supposed to need grease.
Csaba
'71 124 Spider, much modified
'17 124 Abarth, silver
http://italiancarclub.com/csaba/
Co-owner of the best dang Fiat parts place in town
'71 124 Spider, much modified
'17 124 Abarth, silver
http://italiancarclub.com/csaba/
Co-owner of the best dang Fiat parts place in town