Hello All,
I've searched all 38 previous threads on seat belts and haven't found the information I'm looking for so here goes.
Can some kind soul post a photo showing how the retractable seat belts were mounted on '79 cars or thereabouts? Behind the rear seat back I have the original brackets (as shown in the photo below) but am unclear on how to mount and route retractable belts. It's not obvious to me how the reel can be mounted without obstructing the rear seat back. I want to fit retractable belts and feed them through the guides in the back of the rear seat as per the original setup.
Thanks in advance.
Seat Belt Mounting
- DocGraphics
- Posts: 639
- Joined: Sat Mar 19, 2011 6:43 pm
- Your car is a: 1978 124 spider
- Location: Coeur d'Alene Idaho
Re: Seat Belt Mounting
Here's a pic of them mounted in my 78, no back seat to see how they fit to it but appear to be in original position
Don Raugust
1978 Fiat 124 Spider "Fiona" - Burgundy/Tan
2011 pics: http://s918.photobucket.com/albums/ad22 ... 0Pictures/
2012 pics: http://s918.photobucket.com/albums/ad22 ... cs%202012/
1978 Fiat 124 Spider "Fiona" - Burgundy/Tan
2011 pics: http://s918.photobucket.com/albums/ad22 ... 0Pictures/
2012 pics: http://s918.photobucket.com/albums/ad22 ... cs%202012/
Re: Seat Belt Mounting
Thanks Doc.
What I can't work out is that in my car the rear seat back presses hard against the seat belt mounting brackets. So it wouldn't be possible to mount a reel on the front of the bracket and keep the seat back.
Perhaps my brackets aren't original.
Can anybody else enlighten me?
What I can't work out is that in my car the rear seat back presses hard against the seat belt mounting brackets. So it wouldn't be possible to mount a reel on the front of the bracket and keep the seat back.
Perhaps my brackets aren't original.
Can anybody else enlighten me?
-
- Posts: 378
- Joined: Sat Jan 03, 2009 7:12 am
- Your car is a: 1974 Fiat 124 Spider
Re: Seat Belt Mounting
Hi, just a thought. Mine (1974) are mounted inside the seat belt retractor mounting braket you've pictured.
The belt is then threaded through the provision in the rear seat and passes through a seat belt holder I had made up.
It didn't originally have retractables in it so I made up a template of the retactable mounting plate from a later model. Cut, bent and welded them in. Engineer approved and has been working 100% for nearly 20 years.
Heres the best pic i have (of the holder that is).
The belt is then threaded through the provision in the rear seat and passes through a seat belt holder I had made up.
It didn't originally have retractables in it so I made up a template of the retactable mounting plate from a later model. Cut, bent and welded them in. Engineer approved and has been working 100% for nearly 20 years.
Heres the best pic i have (of the holder that is).
- Snoopy
- Posts: 254
- Joined: Wed Mar 18, 2009 7:24 pm
- Your car is a: 1980 CS0 2000 f.i. US [Build 1979]
- Location: Stuttgart, Germany
Re: Seat Belt Mounting
You have the right rear seat ?
CS0 2000 f.i. 79, Abarth 500C 595 2013, Ford C-MAX 1.0 Ecoboost 2015
Re: Seat Belt Mounting
Thanks for your responses guys.
Snoopy, you raise a good question. I have the 'wrong' rear seat i.e. one without seat belt guides rear fitted. It must have been swapped by a previous owner. If I source a correct rear seat back (with the seat belt guides) will it have a cutout space to accomodate the seat belt reel?
Snoopy, you raise a good question. I have the 'wrong' rear seat i.e. one without seat belt guides rear fitted. It must have been swapped by a previous owner. If I source a correct rear seat back (with the seat belt guides) will it have a cutout space to accomodate the seat belt reel?
- Snoopy
- Posts: 254
- Joined: Wed Mar 18, 2009 7:24 pm
- Your car is a: 1980 CS0 2000 f.i. US [Build 1979]
- Location: Stuttgart, Germany
Re: Seat Belt Mounting
Maybe we found a picture or someone else.
I have only picture from the front not of the backside...
I have only picture from the front not of the backside...
CS0 2000 f.i. 79, Abarth 500C 595 2013, Ford C-MAX 1.0 Ecoboost 2015
- Snoopy
- Posts: 254
- Joined: Wed Mar 18, 2009 7:24 pm
- Your car is a: 1980 CS0 2000 f.i. US [Build 1979]
- Location: Stuttgart, Germany
Re: Seat Belt Mounting
Found this:
CS0 2000 f.i. 79, Abarth 500C 595 2013, Ford C-MAX 1.0 Ecoboost 2015
Re: Seat Belt Mounting
Thanks Snoopy. A picture paints a thousand words. All is clear now. I just need to source a seat back like that in tan/beige.