See second picture in post #531 as in that shot it does not appear to be so. Possibly camera angle, variation in die, etc.vandor wrote:The bushings are symmetrical.DieselSpider wrote:You may have the bushing upside down too as the chamfered edge appears larger on top which would help ease the transition over the lip of the control arm if it faced the bottom.
Control arms - rebuild or replace
-
DieselSpider
- Posts: 2130
- Joined: Wed Dec 24, 2014 10:21 pm
- Your car is a: 1978 124 Spider with Isuzu Turbo Diesel