Page 2 of 2
Re: crossmember welds
Posted: Mon Nov 21, 2011 2:40 pm
by 124JOE
dont let that get you down
ive done a rolling restoation and it takes time pashion and money
i have a bucket of tranz parts.what part do you need?i bet its the shift fork
Re: crossmember welds
Posted: Mon Nov 21, 2011 4:11 pm
by lm48
Back in the old days I had a Fiat 124 sedan and I was driving like race driver until the transmission will not stay on the 2nd gear, same as my current issue. Thank you for your offer. I will first take the transmission apart and see the damage. I do have another transmission for parts.
Re: crossmember welds
Posted: Mon Nov 21, 2011 5:29 pm
by dmwhiteoak
joe, Is it possible to replace the shifting fork with trans. still in car. Im thinking this may be my problem also.
Re: crossmember welds
Posted: Mon Nov 21, 2011 7:28 pm
by 124JOE
dmwhiteoak wrote:joe, Is it possible to replace the shifting fork with trans. still in car. Im thinking this may be my problem also.
sorry
NO chance
Re: crossmember welds
Posted: Mon Nov 21, 2011 8:06 pm
by lm48
Yes, there is no work to be done with out having the transmission on the bench. I am already thinking how I will hold the transmission on my chest, under the car and so and so. I remember the day when I got transmission fluid on my hair, nasty. The biggest think is to locate the bad parts inside of the transmission. Sometime is easy sometime is not
Re: crossmember welds
Posted: Mon Nov 21, 2011 10:50 pm
by dmwhiteoak
Bummer ...... I do have a spare so with new gaskets I guess a swap out is in store. Thanks for the info.
Re: crossmember welds
Posted: Tue Nov 22, 2011 2:50 pm
by lm48
If you know the history of the spare one is good, in my case I replaced a bad one with another bad one, so back to square one.
Re: crossmember welds
Posted: Tue Nov 22, 2011 6:33 pm
by dmwhiteoak
I was told it was a good one but who knows. Maybe it was just a selling point.