manoa matt wrote:The adjustment is a bit more involved than that. The only mention of the adjustment for that screw is in the 32 ADFA workshop manual which is a supplement to the Service manual. There is a special gauge that needs to be inserted into the choke housing to make the adjustment.
The diaphragms do not come in the carb rebuild kits, however I've seen them on ebay from time to time. I've rebuilt at least 10 of these carbs and never replaced the diaphragm or adjusted the screw and the cars run fine without it. There are however several other adjustments for the choke unloader that should be checked and performed when rebuilding and adjusting the carbs.
Send me an email for a copy of the 32ADFA workshop manual. It covers every adjustment and specification for the carbs.
matt.scarton@gmail.com
mystery choke adj screw????
-
puddin
Re: mystery choke adj screw????
-
puddin
Re: mystery choke adj screw????
so what is the proper adj ????== can i get a consensus or atleast an amen
-
puddin
-
puddin
Re: mystery choke adj screw????
got it all figure out -- damn the choke pull off and bend the choke plate to leave a 1/8' gap no matter how closed the thermo spring closes the choke-- works great-- i pretty cheap but industrious--