Car starts, idles to almost nothing, then shuts off

Keep it on topic, it will make it easier to find what you need.
Post Reply
radionovember

Car starts, idles to almost nothing, then shuts off

Post by radionovember »

Last question and I think I'll have this thing is good shape. I'm not sure where to begin to troubleshoot this problem. I have an 82 Spider 2000 FI and when I crank it, about 30% of the time, it will crank and then idle immediately down to about 2 on the rpm gauge before dying. I can keep cranking and it will keep doing that unless I rev to about 10 and hold it for about 10 seconds or so. Then it will generally stay up and be fine for the drive. Any ideas what might cause that? It's not necessarily consistent but its regular enough for me to feel like it should be fixed. Thanks for the help...
macawlover70

Re: Car starts, idles to almost nothing, then shuts off

Post by macawlover70 »

Try replacing the cold start valve. You can check it by removing it and it should spray for a few seconds when you turn the ignition key.
2ndwind
Posts: 548
Joined: Tue Oct 27, 2009 10:17 pm
Your car is a: 1982 Spider
Location: Cincinnati OH

Re: Car starts, idles to almost nothing, then shuts off

Post by 2ndwind »

I know I am obsessed with the AFM but I suggest you check that the AFM door swings without catching.
Steve
1982 Red Spider 2000
1919 Old Town Sailing Canoe
radionovember

Re: Car starts, idles to almost nothing, then shuts off

Post by radionovember »

Thanks guys... Ill check the cold start valve this week and if that seems to be fine, I'm going for the AFM. Here's to hoping I can get this thing back to running like new.
majicwrench

Re: Car starts, idles to almost nothing, then shuts off

Post by majicwrench »

It is almost certainly NOT the cold start valve. If CSV fails, car will be miserable hard to start at all. If car starts fine, just won't idle, it is NOT the CSV.
There is an idle air valve on the FI cars that needs to be open when cold. Is easy to check, just look inside cold and hole should not be blocked.
There are some wonderful troubleshooting info on the web somewhere for these. Check, test before replacing expesive parts.
Post Reply