Bolt size and thread for AC studs 2.0L?????

[ORFORD2004]

I remove my AC and now there is oil or prestone leaking from the 2 holes on the side of the engine block. I will put bolts in the holes. But what size and what lenght??????

[BEEK]

10 X 1.25MM VERY SHORT MAYBE 10MM LONG, too long and the bolts will hit the crank throw, use pst, made by loctite a pipe sealant on the bolts, so oil doesnt leak past the threads

[ORFORD2004]

Thanks!!!!! I will

[ORFORD2004]

I just found 20MM long. I'll check the clearance and cut them if necessary.