What is this part, and what fasteners should it have?

Keep it on topic, it will make it easier to find what you need.
Post Reply
paook

What is this part, and what fasteners should it have?

Post by paook »

We've got a part rattling around in the engine bay which is not fastened down. It's got hoses into it, so it hasn't fallen off the car. What is this part, and what size fasteners attach it? We're missing both of them! We'll probably use a washer on the one broken flange attachment to hold that side down.

Image
General orienting photo

Image
Zoomed in photo. Part in question is the one with the broken flange. This is our only FI Fiat, so we can't check the fasteners from another car. The part has zero fasteners through it at the moment, despite what the angle of the photo shows. That bolt is not through this part.
jimincalif
Posts: 410
Joined: Sun Jan 25, 2009 12:43 am
Your car is a: 1980 FI Spider
Location: Lake Forest, CA

Re: What is this part, and what fasteners should it have?

Post by jimincalif »

It's the auxiliary air regulator. Don't know the fastener size.
1980 FI Spider
So Cal Mark

Re: What is this part, and what fasteners should it have?

Post by So Cal Mark »

6mm x 1.0 bolt, you'll need a washer to clamp down the broken ear
Post Reply