Transmission/Oil Pan Drain Plug Wrench

Keep it on topic, it will make it easier to find what you need.
Post Reply
User avatar
courtenay
Patron 2020
Patron 2020
Posts: 1321
Joined: Mon Nov 30, 2009 11:41 pm
Your car is a: 1980 Spider 2000
Location: Courtenay, BC, Canada

Transmission/Oil Pan Drain Plug Wrench

Post by courtenay »

Anybody know what size hex wrench is needed for the transmission and oil pan drain plugs?
Bruce Shearer
'80 Spider Fi
'10 Volvo XC70
'06 GMC 1 Ton PU
'72 Spider a long, long time ago
ventura ace

Re: Transmission/Oil Pan Drain Plug Wrench

Post by ventura ace »

Mine's 12mm.

Alvon
mbouse

Re: Transmission/Oil Pan Drain Plug Wrench

Post by mbouse »

ditto
paook

Re: Transmission/Oil Pan Drain Plug Wrench

Post by paook »

Any tricks for un-sticking a stuck transmission FILL plug? I can't get mine off for the life of me. The plug is in a rather awkard position when the car is not way up on a lift.
dsnyder
Posts: 118
Joined: Thu Nov 12, 2009 11:56 am
Your car is a: 1978 Spider

Re: Transmission/Oil Pan Drain Plug Wrench

Post by dsnyder »

Mine was pretty tight as was my oil pan plug... I sprayed on some liquid wrench and in 15 minutes used a 1/2 Hex and a 30" Braker bar. Both came right out. Also be sure to clean out the plug real good so the Hex fits in tight -Carb cleaner works good but be careful it does not drip in your eyes. On other bolts I've used a little heat too but that would be extreme.

I think it is a steel plug threaded into an aluminum case so it should let go.

Dave
zappi

Re: Transmission/Oil Pan Drain Plug Wrench

Post by zappi »

The torch is a friend. Just be careful.
Post Reply