TROUBLES AGAIN LOL

[fiat218]

what I HAVE is a coil, and a resister and the distributor
so, + side of coil,. goes to the blue and black,
also, is there a wire 10 gauge from the + to the resister, and resister to the distributor,
brown to the - side of coil,. that would be the tachometer

am i right, ?

i have the diagram just not positive DOES ANY ONE HAVE A IDEA

[manoa matt]

What year is the car???

[fiat218]

damn i always for get to say what year the car is
sorry
1969 124 spyder

[mdrburchette]

Here's what I got on my 70 model:
Coil
On +B post blue/black going to ign switch
On +B post black going to condenser
On (-) post pink wire going to resistor

On resistor
black wire going to distributor and on the same post a brown wire coming from tach
The other post has the pink wire.

None of these look thick enough to be 10 gage.

[Tappy]

damn i always for get to say what year the car is
sorry
1969 124 spyder

you can add this also in your signature so you dont have to mention every time

[fiat218]

thank u for your help. i got it in the email

u been a great help

[MacMan]

Because of this post I got my tack working ... Thank you for the information.

Previous owner replaced the coil but was too lazy to remove the old coil and transfer the brown wire. Old coil is now out and the working coil (with brown wire attached) is now fixed properly into its cage.

[mdrburchette]

Cool, good to hear!

[pope]

Denise, sounds like you got a twofer. Way to go.