I recently bought a 79 Fiat last fall and I’m debating what to to for the crossmember issue. There is a hair line crack which needs to be fixed to pass inspection. So I’m wondering if I should get it professionally welded with a bracket or should I attempt replacing it.
If I decide to replace it, does anyone here have the experience removing the crossmember without pulling the engine out? Thank you, Mike
79 Fiat Spider 124
-
Italfiat79
- Posts: 9
- Joined: Wed Nov 17, 2021 7:15 am
- Your car is a: 1979 Fiat Spider 124
-
18Fiatsandcounting
- Posts: 3798
- Joined: Fri Mar 15, 2019 11:23 pm
- Your car is a: 1969 and 1971 124 spiders
- Location: San Francisco Bay Area
Re: 79 Fiat Spider 124
Contact wetminkey on this site, as he's dealt with this before. See: http://www.fiatspider.com/f15/viewtopic ... er#p299772
Also suggest posting this question in the technical area as it will get more views.
-Bryan
Also suggest posting this question in the technical area as it will get more views.
-Bryan
-
Italfiat79
- Posts: 9
- Joined: Wed Nov 17, 2021 7:15 am
- Your car is a: 1979 Fiat Spider 124
Re: 79 Fiat Spider 124
Hi Bryan,
Thank you very much for your help, much appreciated!
Mike
Thank you very much for your help, much appreciated!
Mike