Polyurethane bushings for sway bars front and rear

[ravivhaik]

hi.
i cannot find a complete set for Polyurethane bushing for front and rear sway bars
i have stock sway bars. the originals came with the car.
in international-auto.com there is only 2 center ones.
what about outer ones ?
what about rear sway bar?

can i use universal bushing Polyurethane ? what is the inner diameter of rear sway bar ? front sway bar?

would be glad for any help
regards
raviv

[kmead]

Vicks Auto Sport has most everything for changing over to PU bushings:

http://www.vickauto.com/newstore/index. ... ts_id=3827
http://www.vickauto.com/newstore/index. ... ts_id=3829
http://www.vickauto.com/newstore/index. ... ts_id=3828
http://www.vickauto.com/newstore/index. ... ts_id=3826

[vandor]

Stock front swaybar is 20mm in diameter. Be careful with poly in the ends, as the swaybar does not only rotate, it also changes angles, so it can crack some grades of poly.

[ravivhaik]

Trailing Arm Poly Bushing Kit - is for right suspesion ?

i thought it was called rear sway bar, but Trailing arm is the name?

and this set is what i need?
http://www.vickauto.com/newstore/index. ... ts_id=3828

or do i need all of them ? (8) ?

raviv

[vandor]

Those are for the rear trailing arms, not the swaybar. I've seem broken arms caused by still poly bushings. As the rear end moves up and down it also moves sideways because of the panhard rod, so the trailing arms moves a little side to side.
If the bushings are too stiff the arms will break.

FWIW the Spider 2000 style arms have a stiffer style bushing and are a good upgrade for the earlier Spiders modified for more power.