Heater box

TulsaSpider · Post by **TulsaSpider** » Mon May 19, 2008 8:59 pm

When I got the car the center console was basically loose and disconnected. Also the heater fan just below the heater core, was held together with wire sort of.. anyways I thought I would just put some screws in it and move on, there's no way to put screws in it!! I read somewhere that there are supposed to be four clips of some sort that hold the bottom piece on... I can't see even where that could work.. any advice? I guess I could rig up my own straps or something...
It previously had A/C that the PO removed.
Thanks

rlux4 · Post by **rlux4** » Mon May 19, 2008 9:19 pm

Hey Clark, how you? Here's a picture showing a clip. There should be one on each corner of the heater box. They snag a slot at the top and hook into a tab at the bottom. Hope you can make out the detail in this picture.

Ron

mdrburchette · Post by **mdrburchette** » Tue May 20, 2008 5:37 am

I may have some clips. PM me if you need them.

TulsaSpider · Post by **TulsaSpider** » Tue May 20, 2008 5:26 pm

Thanks Ron,I am doing pretty good thanks! The car is running well! I do not think my clips are under there

Thanks for the pic!
Clark

TulsaSpider · Post by **TulsaSpider** » Tue May 20, 2008 5:28 pm

mdrburchette,
I have one box that I need to look in, I'll let ya know!
Thanks so much!
Clark

Heater box

Heater box

Re: Heater box

Re: Heater box

Re: Heater box

Re: Heater box