The new Standard injectors came with orings however the lower oring is smaller in diameter. It seals on the injector but is a bit smaller than the recess in the manifold. I don't think this will cause a problem but wanted to see if anyone else ran into this.
Brian
FI Orings
-
SLOSpider
- Posts: 1140
- Joined: Wed Mar 03, 2010 2:10 am
- Your car is a: 1973 124 Spider 2.0FI
- Location: Lompoc, Ca USA
FI Orings
1975 124 Spider
1976 Mazda Cosmo http://www.mazdacosmo.com
1989 Chevy k5 Blazer
1967 GT Mustang Fastback
1976 Mazda Cosmo http://www.mazdacosmo.com
1989 Chevy k5 Blazer
1967 GT Mustang Fastback
-
BEEK
- Posts: 1833
- Joined: Wed Mar 24, 2010 10:45 pm
- Your car is a: 1975 Spider
- Location: clermont fl
Re: FI Orings
as long as it makes a positive seal. you do not want a vacuum leak there
Automotive Service Technology Instructor (34 year Fiat mechanic)
75 spider , 6 Lancia Scorpions, 2018 Abarth Spider, 500X wifes, 500L 3 82 Zagatos. 82 spider 34k original miles, 83 pininfarina, 8 fiat spider parts cars
son has 78 spider
75 spider , 6 Lancia Scorpions, 2018 Abarth Spider, 500X wifes, 500L 3 82 Zagatos. 82 spider 34k original miles, 83 pininfarina, 8 fiat spider parts cars
son has 78 spider
-
SLOSpider
- Posts: 1140
- Joined: Wed Mar 03, 2010 2:10 am
- Your car is a: 1973 124 Spider 2.0FI
- Location: Lompoc, Ca USA
Re: FI Orings
Ok well that was my thinking but thought I would ask. Its almost time to install.
1975 124 Spider
1976 Mazda Cosmo http://www.mazdacosmo.com
1989 Chevy k5 Blazer
1967 GT Mustang Fastback
1976 Mazda Cosmo http://www.mazdacosmo.com
1989 Chevy k5 Blazer
1967 GT Mustang Fastback