my engine size

[fiat218]

i looked for the numbers today on my 72, i can't find the numbers that would identify the engine size. i looked above the oil filter , where else should i look?
thanks

[So Cal Mark]

there are two spots on the left side of the block that could have numbers

[kmead]

Go to the source:
http://www.artigue.com/fiat/tuning-book


124 Model Series From S/N Engine Displacement

Spider 1968 124AS 0005619 124AC.040 1438cc
Spider 1969 124AS 0010554 124AC.040 1438cc
Spider 1970 124BS 0021861 124AC.040 1438cc
Spider 1971 124BS 0022589 124AC.040 1438cc
Spider 1971 124BS1 0033950 125BC.04 1608cc
Spider 1972 124BS1 0047032 125BC.040 1608cc
Spider 1973 124CS 0059592 125BC.040 1608cc
Spider 1973 124CS 0063308 132AC.040.3 1592cc
Spider 1974 124CS1 0071650 132AC.040.3 1756cc
Spider 1975 124CS1 0088792 132A1.040.4 1756cc
Spider 1975 124CS1 132A1.040.5 1756cc
Spider 1976 124CS1 0099909 132A1.031.5 1756cc
Spider 1976 124CS1 132A1.031.5 1756cc
Spider 1977 124CS1 0113343 132A1.031.5 1756cc
Spider 1977 124CS1 132A1.031.5 1756cc
Spider 1978 124CS1 0126001 132A1.040.5 1756cc
Spider 1978 124CS1 132A1.031.5 1756cc
Spider 1979 124CS2 0142649 132C2.040 1995cc
Spider 1979 124CS2 132C2.031 1995cc
Spider 1980 124CS2 0157654 132C3.040 1995cc

When too much info is never enough:
http://www.netikka.net/ville.vieri/tc/tclist.htm

[fiat218]

me and my mechanic looked on the block and could not see it . but it has to be there

[kmead]

Perhaps a bit of emery cloth run over those flat spots on the block will bring them up so you can see them. The links I posted show the places to look depending on what block you actually have.

I would expect you have a 1608 though given the easy interchangability any year engine could be in there...

[fiat218]

well thanks

i actually thought they where all stamped at the oil filter housing. my other engine in my parts car is a 1608 and it is stamp just above the oil filter, so perhaps this is not a 1608 in this 72. i am wondering where the stamp is for a 1800?
there no way there is a 2.0 in this car
so i am ASSUMING that it is either a 1608/1800

[djape1977]

on the side of the block, under the intake manifold, there's a cast code that looks something like 132c2000, or 125b1000 etc

[kmead]

The later engines have it stamped to the right of the oil filter housing. It is on a flat area just below the cyclonic oil separator. Which would suggest it is an 1800

Karl

well thanks

i actually thought they where all stamped at the oil filter housing. my other engine in my parts car is a 1608 and it is stamp just above the oil filter, so perhaps this is not a 1608 in this 72. i am wondering where the stamp is for a 1800?
there no way there is a 2.0 in this car
so i am ASSUMING that it is either a 1608/1800

[fiat218]

The later engines have it stamped to the right of the oil filter housing. It is on a flat area just below the cyclonic oil separator. Which would suggest it is an 1800

Karl
THERE WAS NO STAMP at that area/

well thanks

i actually thought they where all stamped at the oil filter housing. my other engine in my parts car is a 1608 and it is stamp just above the oil filter, so perhaps this is not a 1608 in this 72. i am wondering where the stamp is for a 1800?
there no way there is a 2.0 in this car
so i am ASSUMING that it is either a 1608/1800

[BEEK]

post a picture of the short breather hose, going from the block to the cyclonic trap, with that pictuer i can narrow it down if not tell you exactly what you have

[wikkid]

And remember, size isn't everything.

[fiat218]

post a picture of the short breather hose, going from the block to the cyclonic trap, with that pictuer i can narrow it down if not tell you exactly what you have

this help

[BEEK]

back the camera up a little so i can see the whole assembly please, that is the long hose, i need to see the short hose as well where it meets the block and the whole trap

[fiat218]

back the camera up a little so i can see the whole assembly please, that is the long hose, i need to see the short hose as well where it meets the block and the whole trap

try this one, sorry



do u see the arm on that fuel pump photo, well i orderd a new one for this engine , assuming it was a earlie engine, 1608 or 1800, well any ways this new one ( photo ) the arm is differnt, the one in the car ( i don't have a photo ) has like a u shape end on the arm,
so i am wondering what i have? or if this pump will work
thanks for helping

[BEEK]

from what i can see, it appears that you have a 2.0l i would like to see the whole assembly in one picture. if it is a replacement block the serial # could be on the flat area you see near the breather, not the fuel pump mount. what numbers are on the head. not the casting number but the model # ie 132c2343 etc and no the fuel pump from a 1608 and a 2.0 will not interchange. the arm lengths are different