Still can't decide what to do for my electric fuel pump situation. Right now its wired so it always on when the ignition is turned on. Is there anyway I can wire it up so it gets a signal from the oil pressure switch? Or do I have to buy a special oil pressure fuel cutoff switch?
I need to wire a relay in anyway as the OP just ran it off the fuse box.
Tapping into Oil Pressure Wire for electric fuel pump?
-
- Patron 2020
- Posts: 3466
- Joined: Sun Nov 25, 2007 6:00 pm
- Your car is a: 1973 Spider [sold]
- Location: Baltimore, MD
Re: Tapping into Oil Pressure Wire for electric fuel pump?
There is probably a specialty relay designed for this purpose. To make your own circuit, you'll need two relays; a normally-closed relay to power the pump, and a time-delay relay before it, so that you can get the engine running. After a predetermined period the relay times out, and if the O/P switch closes, the signal drops out of the power relay and the pump stops.
My question is, Why bother? The Fiat oil pump is a pretty robust item. If the pickup doesn't get broken, you should see a very gradual decrease of oil pressure over many, many thousands of miles. The O/E pump will probably outlast the piston rings and main bearings, so a full rebuild should include a new pump, but other than that ...
If you are especially nervous, you could always replace the Oil Fail lamp with a very bright bulb (here's one instance where an LED bulb would be actually useful). The gauge and lamp are smack dab in the center of the cluster; tough to miss.
My question is, Why bother? The Fiat oil pump is a pretty robust item. If the pickup doesn't get broken, you should see a very gradual decrease of oil pressure over many, many thousands of miles. The O/E pump will probably outlast the piston rings and main bearings, so a full rebuild should include a new pump, but other than that ...
If you are especially nervous, you could always replace the Oil Fail lamp with a very bright bulb (here's one instance where an LED bulb would be actually useful). The gauge and lamp are smack dab in the center of the cluster; tough to miss.
Re: Tapping into Oil Pressure Wire for electric fuel pump?
My 76 is wired just like you are proposing. Low oil pressure light sender is in the ground side of the fuel pump circuit.
Jim
Jim
- bradartigue
- Posts: 2183
- Joined: Thu Sep 20, 2007 2:35 pm
- Your car is a: 1970 Sport Spider
- Location: Atlanta, GA
Re: Tapping into Oil Pressure Wire for electric fuel pump?
Install mechanical fuel pump. Delete electric fuel pump. Enjoy 30 years of service instead of 3.
1970 124 Spider
http://www.artigue.com/fiat
http://www.artigue.com/fiat
- manoa matt
- Posts: 3442
- Joined: Thu Oct 26, 2006 4:28 pm
- Your car is a: 1978 Fiat 124 Spider 1800
- Location: Honolulu, Hawaii
Re: Tapping into Oil Pressure Wire for electric fuel pump?
"Install mechanical fuel pump. Delete electric fuel pump. Enjoy 30 years of service instead of 3."
I aggree in principal, but recent mech pumps are no where near the quality of the originals. I work on an old ladie's car, she is in her 80's. Bought the car new from the dealer and has driven it every day ever since. 2 years ago she wanted me to replace the mechanical fuel pump pre-emptively as it was over 10 years old. The new mechanical fuel pump lasted about one month. One of the tiny internal check valves was bad. I put the old one back on and its been going every day for the last 2 years which its age is now 12 years old.
Sadly I find myself installing more and more 30+ year old OEM original parts from parts cars as they are more reliable that what is currently being offered. Especially anything made of rubber or that has a rubber component inside.
I aggree in principal, but recent mech pumps are no where near the quality of the originals. I work on an old ladie's car, she is in her 80's. Bought the car new from the dealer and has driven it every day ever since. 2 years ago she wanted me to replace the mechanical fuel pump pre-emptively as it was over 10 years old. The new mechanical fuel pump lasted about one month. One of the tiny internal check valves was bad. I put the old one back on and its been going every day for the last 2 years which its age is now 12 years old.
Sadly I find myself installing more and more 30+ year old OEM original parts from parts cars as they are more reliable that what is currently being offered. Especially anything made of rubber or that has a rubber component inside.