Assume I have a good reason to want to do this. Can I switch the drivers side seat cushion with the passenger side?
Not the seat back, just the part we sit on.
Seat Question
- ga.spyder
- Posts: 3478
- Joined: Tue Nov 06, 2007 7:19 pm
- Your car is a: 1982 Spider 2000
- Location: Blairsville ,Ga.
Re: Seat Question
Just guessing,Doug..but I think you could.I have the seats out of my car and could confirm tomorrow.
Craig Nelson
1982 Spider 2000...pride and joy
1981 Fiat X1/9..gone but not forgotten
1976 124 Spider..the self-healer
2001 BMW 328ci daily driver and track car
Fling It Around Turns !
1982 Spider 2000...pride and joy
1981 Fiat X1/9..gone but not forgotten
1976 124 Spider..the self-healer
2001 BMW 328ci daily driver and track car
Fling It Around Turns !
Re: Seat Question
if it is before 74 yes. did mine both ways because couldnt remember what went where. finaly gave up . years after that dont know but i am pretty sure you can
-
- Posts: 1490
- Joined: Sat Mar 21, 2009 11:55 am
- Your car is a: 1970 SPIDER AND A 1976 SPIDER
- Location: New Jersey
Re: Seat Question
Hi Doug,
The grinder work?
The grinder work?
- 124JOE
- Posts: 3141
- Joined: Fri Jun 24, 2011 7:11 pm
- Your car is a: 1978 124 fiat spider sport 1800
- Location: SO. WI
Re: Seat Question
yes theres 4 tabs that were ment to be bent once
so be carefull
there on the bottom, bend them down abit and pull the cushin up and off the tabs
so be carefull
there on the bottom, bend them down abit and pull the cushin up and off the tabs
when you do everything correct people arent sure youve done anything at all (futurama)
ul1joe@yahoo.com 124joe@gmail.com
ul1joe@yahoo.com 124joe@gmail.com
Re: Seat Question
Don't know George, I'll find out tomorrow.
Thanks guys I'll take a look this weekend and let you know how it comes out.
Thanks guys I'll take a look this weekend and let you know how it comes out.
Re: Seat Question
Thanks Joe, just like you said.
Seat bottoms came right out. Rust on the seat pans, wire brushed and POR'ed. Glad I looked.
Seat bottoms came right out. Rust on the seat pans, wire brushed and POR'ed. Glad I looked.
- 124JOE
- Posts: 3141
- Joined: Fri Jun 24, 2011 7:11 pm
- Your car is a: 1978 124 fiat spider sport 1800
- Location: SO. WI
Re: Seat Question
great
when you do everything correct people arent sure youve done anything at all (futurama)
ul1joe@yahoo.com 124joe@gmail.com
ul1joe@yahoo.com 124joe@gmail.com