Door Hinge Hardware ID

RRoller123 · Post by **RRoller123** » Thu Jan 19, 2012 4:00 pm

Can anyone tell me what the size is for this bolt that is obviously missing from the door hinge system? Thanks. Pete.

manoa matt · Post by **manoa matt** » Thu Jan 19, 2012 8:00 pm

Thread pitch is: M8X1.5 Bolt head will be a 13mm I can't remember if there is a captive nut back there or if you need to add a nut when you insert the bolt.

RRoller123 · Post by **RRoller123** » Thu Jan 19, 2012 8:10 pm

Thanks muchly! There appears to be a captive back there so it will be an easy fix. Pete.

azruss · Post by **azruss** » Fri Jan 20, 2012 12:05 am

that bolt holds the top of the door retainer. it should (and looks like) the threaded insert is still intact. As i recall the fastener should have a flat washer and star washer.

vandor · Post by **vandor** » Fri Jan 20, 2012 12:19 am

manoa matt wrote:Thread pitch is: M8X1.5 Bolt head will be a 13mm I can't remember if there is a captive nut back there or if you need to add a nut when you insert the bolt.

That bolt has a 10mm head, and the thread is 6x1.0mm. About 12mm long.

BTW, M8 bolts on Fiats are 1.25 pitch, not 1.5.

RRoller123 · Post by **RRoller123** » Fri Jan 20, 2012 8:24 am

Thanks, I will get out today and buy the parts. One little step at a time as my stitches slowly heal.

124JOE · Post by **124JOE** » Fri Jan 20, 2012 11:58 am

go to stainless steal

RRoller123 · Post by **RRoller123** » Fri Jan 20, 2012 7:24 pm

No, the stitches are the kind that dissolve over time. <{:^)

Door Hinge Hardware ID

Door Hinge Hardware ID

Re: Door Hinge Hardware ID

Re: Door Hinge Hardware ID

Re: Door Hinge Hardware ID

No!!!!! 10mm

Re: Door Hinge Hardware ID

Re: Door Hinge Hardware ID

Re: Door Hinge Hardware ID