carb/manifold

fiat218 · Post by **fiat218** » Thu Oct 27, 2011 7:09 pm

i have a 1980 2000, carb/
i am replacing the intake with a 1800 intake and removing the smog setup
i took the pump off and got the carb off
i will be removing the intake and i am wondering what do i do with all the hose and them little air lines

i am putting on a 32/36 DFEV Weber Carburetor Two Barrel Progressive Carb

124JOE · Post by **124JOE** » Thu Oct 27, 2011 8:57 pm

they can stay hooked up
remove the intake and put on the 1800 and the new carb
keeping the fuel and vacume from the dizzy"dis"

i pulled that carb for cleaning

fiat218 · Post by **fiat218** » Thu Oct 27, 2011 10:16 pm

so all them hoses are on the intake?

124JOE · Post by **124JOE** » Thu Oct 27, 2011 10:18 pm

yep
do you have a ele choke?

fiat218 · Post by **fiat218** » Fri Oct 28, 2011 6:29 am

yes i do

fiat218 · Post by **fiat218** » Fri Oct 28, 2011 6:52 am

thanks that all i need to know, I THINK

fiat218 · Post by **fiat218** » Fri Oct 28, 2011 6:59 pm

i got a problem
all bolts are off the intake, and that tin dust cover back side the cam wheel is holding the intake from sliding off.
there nothing holding that cover on ( i dont think)
i tried to slide it off and it dont budge/ what with it ?

WYSpider · Post by **WYSpider** » Fri Oct 28, 2011 7:13 pm

Hidden bolt? 7 bolts.

fiat218 · Post by **fiat218** » Fri Oct 28, 2011 7:18 pm

7 bolts ? that hold on that black tin dust pan, behind the cam wheels

WYSpider · Post by **WYSpider** » Fri Oct 28, 2011 7:22 pm

To hold intake. See above link.

fiat218 · Post by **fiat218** » Fri Oct 28, 2011 7:24 pm

NO no

the metal dust cover behind the cam wheels. driver side cover will not slide off, the cover is holding the intake on.just on the front corner

124JOE · Post by **124JOE** » Fri Oct 28, 2011 7:52 pm

did you unbolt the cam box?

fiat218 · Post by **fiat218** » Fri Oct 28, 2011 7:57 pm

u mean the top cover of the cam? no

124JOE · Post by **124JOE** » Fri Oct 28, 2011 8:17 pm

i ment the cam and the housing its in.
as it shouldnt hold up on the bracket for the timing belt.when your unbolting the intake.

fiat218 · Post by **fiat218** » Fri Oct 28, 2011 8:22 pm

the intake manifold\ wont come off. dust cover needs to come off.. rite?

carb/manifold

carb/manifold

Re: carb/manifold

Re: carb/manifold

Re: carb/manifold

Re: carb/manifold

Re: carb/manifold

Re: carb/manifold

Re: carb/manifold

Re: carb/manifold

Re: carb/manifold

Re: carb/manifold

Re: carb/manifold

Re: carb/manifold

Re: carb/manifold

Re: carb/manifold