steering wheel

fiat218 · Post by **fiat218** » Sat May 14, 2011 7:47 am

what size is that nut on the steering wheel ,so i can remove one?
is it a 15

baltobernie · Post by **baltobernie** » Sat May 14, 2011 10:17 am

That nut takes a 24mm socket.

fiat218 · Post by **fiat218** » Sat May 14, 2011 10:34 am

ok thanks. reason why i asked is because im 80 miles from my house and have no tools with me and i got this car that i want to remove the steering wheel to get the arms off undernieth

aj81spider · Post by **aj81spider** » Sat May 14, 2011 1:55 pm

A close enough socket is 1". I've successfully used the 1" to move steering wheels around both my cars.

manoa matt · Post by **manoa matt** » Sat May 14, 2011 3:43 pm

The standard equivalent is a 15/16" socket

DocGraphics · Post by **DocGraphics** » Sat May 14, 2011 4:31 pm

I just put the stock style back on mine yesterday & it is 15/16"

aj81spider · Post by **aj81spider** » Sat May 14, 2011 4:57 pm

I didn't have a 15/16, but did have a 1". 24 MM is 0.945 inches. 15/16 is 0.9375. 15/16 is closer (0.01" vs 0.06), but not so much that I worried about it.

Depends what's in your tool box. I wouldn't (and didn't) go buy a socket if I had either one, especially because the nut doesn't bind like a bolt in the engine. If you're going to buy a socket, get the 24 MM.

fiat218 · Post by **fiat218** » Sat May 14, 2011 8:26 pm

i got it thanks,it was a 24mm

steering wheel

steering wheel

Re: steering wheel

Re: steering wheel

Re: steering wheel

Re: steering wheel

Re: steering wheel

Re: steering wheel

Re: steering wheel