My oil pressure is too high

dougburdick · Post by **dougburdick** » Sat Apr 09, 2011 3:49 pm

On my 2lt spider I typically see around 60psi or so at 60mph with a stewart warner mechanical gauge. I have just installed a speed hut electronic gauge with their sending unit in my 76 1.8 scorpion, and I'm seeing 90+ at 60mph. I'm running Moble 1 10w30 pure synthic and a Fram ph-16 filter.Any thoughts?

jimincalif · Post by **jimincalif** » Sat Apr 09, 2011 6:45 pm

Gauge not accurate?

pooldoctorstl · Post by **pooldoctorstl** » Sat Apr 09, 2011 9:19 pm

Make sure the sending unit is compatible with the gauge, and not made for an idiot light.

Jeff

dougburdick · Post by **dougburdick** » Sun Apr 10, 2011 1:12 am

the sending unit was sold with,and is specific to the gauge

fiatfactory · Post by **fiatfactory** » Sun Apr 10, 2011 8:24 am

My oil pressure is too high

My oil pressure is too high

Re: My oil pressure is too high

Re: My oil pressure is too high

Re: My oil pressure is too high

Re: My oil pressure is too high